The drumstand provides a solid base to place the chemical drum and pump. Measuring the chemical consumption is done by a scale or load cell. In case of the HP1 & HP2 a scale will be used, for the HP3.4 & HP3.5 the load cell will measure the consumption.

Dimensions: 120*55*50 cm

Imaca Suction lance with level sensor

The Imaca suction lance can be applied for safer drum changes. During the drum change the valve on the suction lance can be shut, creating a vacuum in the lance. This ensures that the chemicals will stay in the suction lance an don’t run back down. Even when you forget the valve, the check valve will stop the chemicals from flowing out.

By using the anti-float cap, we can ensure the suction lance will be steady in the chemical drum. By simply unscrewing the anti-float cap, you can detach the suction lance from the drum.

As an extra indication the suction lance contains level sensors. These ensure that the alarm will show when the drum needs to be changed. Due the two level sensors, first a warning will be given and after that an empty drum alarm. These will show on the pump, for this the signal cable is attached. The Imaca EPZ pump will be required for this setup.